China Suppliers Factory TY-SXD1-FSH1 Waterproof Box for Reliable IP44 Protection Against Moisture and Dust
Product use scope and conditions of use
The TY series of electric energy meter boxes integrate single-phase and three-phase types, and are suitable for power supply systems with rated current of 10A-250A, AC 50Hz or 60Hz, and voltage of 220V to 690V, and perform single-phase and power electric energy metering and control tasks; its operating environment requires a temperature range of -25℃～+50℃ (average temperature ≤+35℃ within 24 hours), and the relative humidity does not exceed 80% at 40℃ under clean air conditions, and higher humidity levels are allowed under low temperature conditions.
Installation Specifications
Thoroughly check the structural integrity and component completeness of the cabinet before installation.
Use vertical installation, and the inclination angle is strictly controlled within the range of ≤5°. Site selection principle: no mechanical vibration/strong impact source, no chemical corrosion risk area. Deploy in a cool and dry environment, avoiding continuous direct sunlight.
Do not contact with strong alkalis, oxidizing acids, amines, ketones, chlorinated hydrocarbons and aromatic solvents.
During use, be careful to prevent collisions and scratches with sharp objects to keep the surface protective layer intact.
Standardized installation process
Box opening: Remove the central fixing screw at the bottom and open the box according to the standard process.
Basic fixation: Locate the wall drilling point according to the preset hole position, lock the base after implanting the expansion tube, and carry out the final assembly of the upper cover.
| Protection Category | Implementation Standard |
|---|---|
| Mechanical protection | Avoid vibration and shock sources and regularly check the fixed structure |
| Chemical protection | Establish a hazardous chemical isolation mechanism |
| Environmental protection | Implement temperature and humidity monitoring and UV shielding measures |
Strict compliance with this specification can significantly extend the service life of metering equipment and ensure the reliability of power system operation.
Core electrical parameters
| Parameter Category | Technical Specifications |
|---|---|
| Rated current | 10A–250A (full range coverage) |
| Short-time withstand current | ≥30kA (main busbar system) |
| Parameter Category | Technical Specifications |
|---|---|
| Insulation resistance | ≥20MΩ (normal working condition) |
| Rated insulation voltage | 800V (UI value) |
| Electrical adaptability | 50Hz/60Hz dual frequency compatible |
| Protection level | IP44 (dust and splash proof) |
- Current carrying capacity: The main busbar supports a wide current load range from 10A to 250A.
- Short circuit protection: 30kA high short circuit current tolerance ensures system stability.
- Insulation reliability: Double insulation design (resistance/voltage) ensures safe operation.
- Environmental adaptability: IP44 protection level to cope with dust and liquid splashing scenes.
Appearance and installation dimensions
