0102030405
China TY-SXD1 Single-Phase Electric Energy Metering Box - Suppliers & Factory for Reliable Power Measurement
Application Scenario
1. Civilian power distribution system
Residential buildings
- Household meter centralized installation area for new commercial housing and affordable housing projects
- Electricity meter renovation and upgrading project for old residential areas (replacing traditional mechanical meter boxes)
- Villa/self-built house independent meter measurement point
- Independent energy metering for street shops, convenience stores, and small studios
- Office building layered metering or tenant itemized metering nodes
2. Public facilities and special scenes
Public space power distribution
- End-of-line metering for public buildings such as school dormitories and community activity centers
- Charging pile supporting metering (AC slow charging pile single gun metering)
- Temporary power supply metering node at construction site
- Temporary power distribution box integration for exhibition/event venues
Technical compatibility instructions
- Safety protection: The fully enclosed structure meets IP44 protection, effectively preventing dust and splashing water (especially suitable for humid environments such as underground garages).
- Environmental tolerance: SMC material's UV resistance ensures long-term outdoor use (lifespan ≥ 25 years).
- Installation advantages: Modular assembly structure improves construction efficiency by more than 60%.
Product installation and use
1. Check before installation
Component integrity verification
After unpacking, you need to fully check the integrity of the box structure, fasteners and internal components.
Environmental suitability assessment
The site selection should avoid vibration sources, chemical corrosion areas and strong impact environments. Prefer a cool and dry place to avoid long-term direct ultraviolet rays (it is recommended to install a sunshade).
After unpacking, you need to fully check the integrity of the box structure, fasteners and internal components.
Environmental suitability assessment
The site selection should avoid vibration sources, chemical corrosion areas and strong impact environments. Prefer a cool and dry place to avoid long-term direct ultraviolet rays (it is recommended to install a sunshade).
2. Installation and operation specifications
- 1 Positioning and orientation: The box is installed vertically (allowable deviation ≤ 3°), and the tilt angle is strictly prohibited.
-
2
Open the box:
a. Remove the two fixing screws in the middle of the bottom plate.
b. Open the door in the direction indicated. -
3
Wall fixing:
a. Drill holes according to the installation holes.
b. Insert the expansion tube and lock the base.
c. Finally, assemble the top cover.
3. Material protection warning
◆ Chemical Taboos:
- It is strictly forbidden to contact with strong alkali/oxidizing acid/aromatic solvents.
◆ Physical protection:
- Avoid collision and scratches with sharp objects during operation.
- Regularly clean the corrosive dust on the surface.
- Regularly clean the corrosive dust on the surface.
4. Operation and maintenance points
- Structural maintenance: Fasteners should be re-tightened to the rated torque (8-10N·m) every 12 months.
- Abnormal treatment: If the cabinet is found to be swollen, discolored or other signs of aging, it should be immediately stopped and replaced.
TY-SXD1-1A Model, configuration and installation dimensions
| TY | SX | D1 | 1 | A |
|---|---|---|---|---|
| Company Code | SMC non-metallic metering box | Single item single meter box | Table number | First Generation |
| Configuration | name | Component Model | quantity |
|---|---|---|---|
| Incoming switch | Disconnector | CDGK 2P 100A | 1 |
| Outlet switch | Miniature circuit breakers | CDBLEK-63/2P C63A 30mA | 1 |
TY-SXD1-1B Model, configuration and installation dimensions
| TY | SX | D1 | 1 | B |
|---|---|---|---|---|
| Company Code | SMC non-metallic metering box | Single item single meter box | Table number | Second Generation |
| Configuration | name | Component Model | quantity |
|---|---|---|---|
| Incoming switch | Disconnector | CDGK 2P 100A | 1 |
| Outlet switch | Miniature circuit breakers | CDBKs C type 2P 63A dedicated to power grid | 1 |
Frequently Asked Questions (FAQ)
What is the protection rating and outdoor lifespan of the SMC metering box?
The metering box features a fully enclosed structure that meets IP44 protection standards, making it highly effective against dust and water splashes. Constructed from UV-resistant SMC material, it offers an outdoor service lifespan of 25 years or more.
Can these boxes be installed in underground garages or outdoor environments?
Yes. The IP44 protection rating makes it ideal for humid environments like underground garages. For outdoor installations, the SMC material provides excellent UV resistance. However, it is recommended to install a sunshade to avoid long-term direct ultraviolet exposure.
What chemical substances should be avoided to prevent damage to the box?
It is strictly forbidden to allow the SMC material to come into contact with strong alkalis, oxidizing acids, or aromatic solvents, as these chemical agents can compromise the structural integrity of the box.
What are the routine maintenance requirements for the metering box?
Fasteners should be re-tightened to the rated torque of 8-10N·m every 12 months. Additionally, you should regularly clean corrosive dust from the surface and check for signs of aging, such as swelling or discoloration.
What is the difference in configuration between the TY-SXD1-1A and TY-SXD1-1B models?
While both models utilize the CDGK 2P 100A incoming switch, the first-generation TY-SXD1-1A uses a CDBLEK-63/2P C63A 30mA miniature circuit breaker as the outlet switch, whereas the second-generation TY-SXD1-1B uses a CDBKs C type 2P 63A breaker dedicated to the power grid.