Single-Phase Electric Energy Meter Box TY-SXD1 Series - Reliable China Suppliers & Factory for Power Management Solutions
Application Scenario
- Household meter centralized installation area for new commercial housing and affordable housing projects
- Electricity meter renovation and upgrading project for old residential areas (replacing traditional mechanical meter boxes)
- Villa/self-built house independent meter measurement point
- Independent energy metering for street shops, convenience stores, and small studios
- Office building layered metering or tenant itemized metering nodes
- End-of-line metering for public buildings such as school dormitories and community activity centers
- Charging pile supporting metering (AC slow charging pile single gun metering)
- Temporary power supply metering node at construction site
- Temporary power distribution box integration for exhibition/event venues
Technical Compatibility Instructions
The fully enclosed structure meets IP44 protection, effectively preventing dust and splashing water (especially suitable for humid environments such as underground garages).
SMC material's UV resistance ensures long-term outdoor use (lifespan ≥ 25 years).
Modular assembly structure improves construction efficiency by more than 60%.
Product Installation and Use
- Component integrity verification: After unpacking, you need to fully check the integrity of the box structure, fasteners and internal components.
- Environmental suitability assessment: The site selection should avoid vibration sources, chemical corrosion areas and strong impact environments.
- Placement: Prefer a cool and dry place to avoid long-term direct ultraviolet rays (it is recommended to install a sunshade).
- Positioning and orientation: The box is installed vertically (allowable deviation ≤ 3°), and the tilt angle is strictly prohibited.
-
Open the box:
a. Remove the two fixing screws in the middle of the bottom plate.
b. Open the door in the direction indicated. -
Wall fixing:
a. Drill holes according to the installation holes.
b. Insert the expansion tube and lock the base.
c. Finally, assemble the top cover.
It is strictly forbidden to contact with strong alkali/oxidizing acid/aromatic solvents.
- Avoid collision and scratches with sharp objects during operation
- Regularly clean the corrosive dust on the surface
- Structural maintenance: Fasteners should be re-tightened to the rated torque (8-10N·m) every 12 months.
- Abnormal treatment: If the cabinet is found to be swollen, discolored or other signs of aging, it should be immediately stopped and replaced.
TY-SXD1-1A Model, Configuration and Installation Dimensions
| TY | SX | D1 | 1 | A |
| Company Code | SMC non-metallic metering box | Single item single meter box | Table number | First Generation |
| Configuration | Name | Component Model | Quantity |
| Incoming switch | Disconnector | CDGK 2P 100A | 1 |
| Outlet switch | Miniature circuit breakers | CDBLEK-63/2P C63A 30mA | 1 |
TY-SXD1-1B Model, Configuration and Installation Dimensions
| TY | SX | D1 | 1 | B |
| Company Code | SMC non-metallic metering box | Single item single meter box | Table number | Second Generation |
| Configuration | Name | Component Model | Quantity |
| Incoming switch | Disconnector | CDGK 2P 100A | 1 |
| Outlet switch | Miniature circuit breakers | CDBKs C type 2P 63A dedicated to power grid | 1 |
Frequently Asked Questions (FAQ)
The enclosure provides IP44-rated safety protection against dust and splashing water, and the UV-resistant SMC material ensures a service life of ≥ 25 years in outdoor environments.
It is suitable for residential buildings (new developments, old renovations, villas), small commercial units (shops, studios, offices), public spaces (dormitories, EV charging piles), and temporary power installations (construction sites, exhibition venues).
The box must be installed vertically with an allowable tilt deviation of ≤ 3°. Any severe tilt angle is strictly prohibited.
It is strictly forbidden for the enclosure to come into contact with strong alkalis, oxidizing acids, or aromatic solvents.
TY-SXD1-1A represents the First Generation model using the CDBLEK-63/2P C63A 30mA outlet breaker, while TY-SXD1-1B represents the Second Generation model equipped with the CDBKs C type 2P 63A dedicated grid breaker.
Fasteners must be re-tightened to the rated torque (8-10N·m) every 12 months. If the cabinet shows signs of swelling, discoloration, or aging, it should be replaced immediately.