Single-Phase Electric Energy Metering Box TY-SXD2 Series from China Suppliers and Factory - Reliable Power Measurement Solutions
Product Overview
Teyi Electric's TY series FRP electric energy metering box is manufactured using SMC composite material molding technology. The material is a composite of unsaturated polyester resin and glass fiber. The product has multiple advantages: excellent electrical insulation performance, outstanding mechanical strength, good flame retardant properties (in line with relevant fire protection standards), excellent corrosion resistance and anti-aging ability, and beautiful appearance design. Under normal use conditions, the indoor service life can reach 40 years and the outdoor service life can reach 30 years. The performance is far superior to traditional metal or plastic meter boxes.
This series of products has a flexible design and supports single-family independent installation or multi-family combined configuration, and is suitable for all kinds of residential areas and civil power distribution sites. Its installation process is simple and fast, it adopts concealed wiring scheme, and is equipped with professional rainproof structure design to ensure reliable protection for power metering equipment in outdoor environments.
Product Installation and Use
Before operation, it is necessary to fully check whether all components of the meter box (including accessories and fasteners) are complete and intact.
The box must be fixed vertically, and the maximum allowable tilt angle is no more than 54°.
Prioritize locations without severe vibration, mechanical shock, and corrosive gases or chemicals.
The box material is not resistant to strong alkali, oxidizing acid, amine, ketone solvents, and is easily corroded by chlorinated hydrocarbons and aromatic solvents. Contact with such chemicals is strictly prohibited; during use, avoid collision with hard objects or scratching of the surface with sharp objects.
The installation location should be in a cool and dry area to reduce long-term direct sunlight to ensure the life of the meter.
With the fixing points facing inward, remove the two upper cover screws in the center of the bottom, and open the box according to the instructions.
Locate the wall drilling holes according to the box installation holes, insert the expansion tube and fix the base, and finally assemble the upper cover.
Model Specifications & Configurations
TY-SXD2-4B Model, configuration and installation dimensions
| TY | SX | D2 | 4 | B |
| Company Code | SMC non-metallic metering box | Single-phase multi-meter metering box | Table number | Second Generation |
| Configuration | Name | Component Model | Quantity |
|---|---|---|---|
| Total incoming line | Molded case circuit breaker | CDMK-125C/3300 125A | 1 |
| Incoming switch | Disconnector | CDGK 2P 100A | 4 |
| Outlet switch | Miniature circuit breakers | CDBKs C type 2P 63A dedicated to power grid | 4 |
TY-SXD2-6E Model, configuration and installation dimensions
| TY | SX | D2 | 6 | E |
| Company Code | SMC non-metallic metering box | Single-phase multi-meter metering box | Table number | Fifth Generation |
| Configuration | Name | Component Model | Quantity |
|---|---|---|---|
| Total incoming line | Molded case circuit breaker | CDMK-125C/3300 125A | 1 |
| Incoming switch | Disconnector | CDGK 2P 100A | 6 |
| Outlet switch | Miniature circuit breakers | CDBKs C type 2P 63A dedicated to power grid | 6 |
TY-SXD2-6B Model, configuration and installation dimensions
| TY | SX | D2 | 6 | B |
| Company Code | SMC non-metallic metering box | Single-phase multi-meter metering box | Table number | Second Generation |
| Configuration | Name | Component Model | Quantity |
|---|---|---|---|
| Total incoming line | Molded case circuit breaker | CDMK-125C/3300 125A | 1 |
| Incoming switch | Disconnector | CDGK 2P 100A | 6 |
| Outlet switch | Miniature circuit breakers | CDBKs C type 2P 63A dedicated to power grid | 6 |
TY-SXD2-12B Model, configuration and installation dimensions
| TY | SX | D2 | 12 | B |
| Company Code | SMC non-metallic metering box | Single-phase multi-meter metering box | Table number | Second Generation |
| Configuration | Name | Component Model | Quantity |
|---|---|---|---|
| Total incoming line | Molded case circuit breaker | CDMK-250C/3300 200A | 1 |
| Incoming switch | Disconnector | CDGK 2P 100A | 12 |
| Outlet switch | Miniature circuit breakers | CDBKs C type 2P 63A dedicated to power grid | 12 |
